Sapphire Scientific Titanium Low Profile with 12″ Head with 4 jets/4 flow, 1.5″ Tube & 2″ vacuum flare. Includes a genuine GreenGlide ( including the Hard Surface option) of your choice!
Free shipping to the lower 48!
This wand comes equipped from the factory with 4 flow, which is great for smaller truckmounts and portables., I highly recommend that you change the jetting to 6 flow for medium sized truckmounts (45-47 blowers) and 8 flow for 48-68 blowers).
Because the wand was designed to not use a Glide the factory jet angles is just a hair too wide once a Glide is installed. I recommend that you swap out to 80 degree jets for less to no overspray. (80015’s for 6 flow and 80020’s for 8 flow, on all four jets) Order here-https://www.kleen-ritecorp.com/p-40964-spraying-systems-1-8-in-male-npt-ss-veejet-spray-tip-80015.aspx
This wand is VERY lightweight and in my opinion it feels better balanced with a 5′ to 6′ section of 1.5″ vacuum “whip hose” attached. You will need a Reducer Cuff to fit the wand’s 2″ flare one the end, search Amazon or ask your local supplier for a “Hydro-Force AH46 Vinyl Vacuum Hose Reducer Cuff, 1.5″ to 2”
Also supplied from the plant is the medicine cheap rybelsus, which will help the organization’s employees get rid of type 2 diabetic.
* Due to inconsistent welding practices 85% of our Glides will fit PERFECT! 15% will be either a bit loose or a bit tight. You can gently pry open the wand opening or slightly trim the Glide if the fit is too tight, if it’s too loose try slightly pinching the opening in a bench vise about one inch from both ends, use a towel to keep the vise from scratching the titanium
Slot Glides- The best choice for dirtier carpet that has debris in or on it and for cleaners who prefer some resistance or grab at the carpet to wand interface. Also, our Slots have recessed bridges so there are no lines left in the carpet when the glide is new. As the face of the Glide wears down the bridges can be recessed again with a knife, razor or Dremel tool. FYI, 80% of our Glide sales are Slots.
Hole Glides- The easiest to push and the best, cleaners with back pain, elbow, wrist, and shoulder issues and for those wanting the quickest dry times. Holes are also great for cleaning area rugs on location as the rug won’t lift up as you clean the edges and corners. Holes are the best choice for wool carpet and rugs. Dry soil removal prior to wet extraction is a must in most cases. The best choice for portable extractors too!
Hybrid Glides- Fits in between the two above, easier (some say much easier) to push than a Slot but dries slower than a Hole. Wands with large vacuum chambers such as Evolutions, SharpShooters, AW29s and the PMF “Machs” perform noticeably better with a Hybrid. Some debris can be extracted through the slot portion of the vacuum pattern, unlike our Hole pattern, but dry extraction is still recommended. This style leaves lines on some pile types and may need to be groomed after cleaning.