Skip to content
Made in the USA · Trusted by 19,000+ cleaning pros Questions? call (775) 552-5429

JubiLee Heat Valve- limited stock

$40.00

Description

Keep Hot Solution Closer to the Head

Optional Circulation Adapter for the JubiLee Upholstery Tool

For cleaners who want hot solution at the tool, especially when using truckmounts or hot-water portables, the JubiLee Optional Circulation Adapter is an elegantly simple solution.

This small brass fitting installs inline at the 1/8″ quick-connects just behind the head and uses a precision 1.5 flow orifice to create continuous circulation. In practical terms, it adds an additional 1.5 flow through the assembly. Since the JubiLee tool jet is also 1.5 flow, the adapter brings the total flow to approximately 3 flow while in use.

That matters because many truckmounts need about 3 flow either to keep hot water moving properly through the system or to activate fuel-fired heating units. The result is simple: hot solution stays much closer to the head, so when the operator resumes cleaning, the JubiLee is ready with hot water almost immediately.

How It Works

Inside the adapter is a precision 1.5 flow orifice built into the small brass nipple. That controlled bypass flow sends solution through the system continuously, bringing heat as close to the head as possible during operation.

When the operator pauses to:

  • answer a phone call
  • talk with the customer
  • pre-vacuum
  • precondition or shampoo fabric
  • groom or reset cushions
  • reposition hoses
  • move furniture
  • tarp or set pieces out to dry

…the water continues circulating instead of sitting still and cooling in the line.

That means when cleaning resumes, hot solution is already at the head rather than having to wait for the line to heat back up.

Why It Matters

Many upholstery jobs involve frequent stops and starts. Without circulation, water in the line can cool quickly. The Optional Circulation Adapter helps solve that by maintaining constant movement through the system.

This is especially helpful for operators using truckmounts with fuel-fired heaters, because those units often require roughly 3 flow before the burner will activate. By adding an additional 1.5 flow bypass to the JubiLee’s 1.5 flow jet, this adapter helps maintain the flow needed to keep heat available.

It is also useful for:

  • truckmount users who want hotter water at the head
  • hot-water portable users who want more consistent solution temperature
  • operators who pause frequently during upholstery work
  • cleaners who prefer immediate hot-water response between passes

Simple, Smart, and Removable

The adapter features both a male and female 1/8″ quick disconnect, so it can be:

  • installed in seconds
  • removed in seconds
  • used only when needed
  • carried as a simple add-on instead of a bulky permanent attachment

No special tools. No complicated plumbing. No major modification to the tool.

Designed Around Real-World Use

The circulation stream discharges into the vacuum chamber and strikes the replaceable black swivel cuff adapter. Because that section is thick vinyl and constantly rotating in normal use, it is well suited to this application. And if that part ever does wear over time, it is a simple and inexpensive replacement.

Key Benefits

  • Keeps hot solution closer to the head
  • Helps reduce temperature drop during stop-and-start cleaning
  • Adds 1.5 flow bypass, bringing total working flow to about 3 flow
  • Helps many truckmounts maintain water movement or activate fuel-fired heating
  • Creates constant circulation through the assembly
  • Installs inline at the head with 1/8″ quick disconnects
  • Easy to add or remove during the job
  • Compact, inexpensive, and highly effective
  • Developed specifically for the JubiLee system

Important Operating Note

Because the adapter creates constant circulation, water will continue flowing back to the waste tank whenever the solution supply is left on.

If you stop working and do not want to continue using water, simply shut off the ball valve at the tool or at the lead pressure hose.

A Clever Little Upgrade

The JubiLee was designed to be versatile, adaptable, and field-practical. The Optional Circulation Adapter continues that philosophy: a small, highly useful upgrade that gives operators one more level of control over how the tool performs in the real world.

If you want faster hot-water response at the head without bulky external hardware, this is the answer.

OH! and if you manage to plug that tiny hole? the smallest welding tip cleaner is a perfect fit

 

 

 

Decal included for training technicians. 

 

Reviews

There are no reviews yet.

Be the first to review “JubiLee Heat Valve- limited stock”

Your email address will not be published. Required fields are marked *